How to Make a Neon Plexi-Glass Peg Board

Bella Breakdown
Neon colors are so hot right now. So, what better then adding a pop of color style to you organizational world then with pieces of see through neon?

Using neon Plexiglas pieces you can turn an inexpensive piece of pegboard into an organizing board you could use in your home or office… not that they’re not perfectly organized already like ours are. (not!)

All you’ll need is a 2’x4’ piece of pegboard – that’s a standard size you’ll be able to find at almost any hardware store – a beautiful color of spray paint to coat it in, some pieces of neon Plexiglas is various sizes, a drill and drill bit and some elastic cord.

Start by spray-painting your pegboard. Making sure you’re in a well-ventilated area using a respirator mask for safety, we don’t want you getting loopy off your organization board!

While it’s drying, start preparing the pockets and pegs so you’re ready to go.

Your pieces of Plexi should come with a paper coating already on them. Leave that on while you drill your holes so you can draw circles where you want them, plus it adds extra support.

Don’t stress if you were too excited and already took it off. Just cover both sides with painters tape and you’re all set. In order to secure the pockets on the board, just use elastic cord, knot one side, slip it up through the hole and through the other then secure on the backside.

I know some co-workers who are going to be jealous of this one!